PartsTable
Technical Data Sheet
Download PDF

356200S — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

356200S: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL, hole_diameter: 0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.965 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL AND INTERNAL TEETH, material_thickness: 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-017-3128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
356200S
NSN: 5310-00-017-3128
FSC: 5310 — Nuts and Washers
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
hole_diameter0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.965 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL AND INTERNAL TEETH
material_thickness0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
NSN5310-00-017-3128
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 356200S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT EXTERNAL AND INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: -QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.965 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT EXTERNAL AND INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION-QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.965 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
MATERIAL THICKNESS0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
13XX14215Reference document
Same NSN cross-reference
Reference document — Secondary reference
X7-26Reference document
Same NSN cross-reference
Reference document — Secondary reference
173128Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 356200S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 356200S?
356200S is a WASHER,LOCK.
What parts can replace 356200S?
There are 3 known substitutes for 356200S: 13XX14215, X7-26, 173128. Substitute compatibility should be verified for your specific system.
What is the NSN for 356200S?
356200S is cataloged in the U.S. Government catalog under NSN 5310-00-017-3128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 356200S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.