PartsTable
Technical Data Sheet
Download PDF

356115 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

356115: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: SLEEVE, nut_length: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, nut_diameter: 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN, thread_class: 3B, thread_length: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM OVERALL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-677-7664, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
356115
NSN: 3110-00-677-7664
NIINs: 006777664, 008552433
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSLEEVE
nut_length1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
nut_diameter0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
thread_class3B
thread_length0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM OVERALL IN
thread_seriesUNF
flange_diameter0.730 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
flange_thickness0.080 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.500 INCHES IN
NSN3110-00-677-7664
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 356115 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
•
LOCATING FEATURE: ONE DIRECTION
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, ONE-DIRECTION LOCATING, TWO LIP INNER RING, ONE LIP OUTER RING, SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-724,97497 MFR REF 1ST MATERIAL RESPONSE INNER RING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0007 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
LOCATING FEATUREONE DIRECTION
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, ONE-DIRECTION LOCATING, TWO LIP INNER RING, ONE LIP OUTER RING, SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONPWA-724,97497 MFR REF 1ST MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONPWA-724,97497 MFR REF 2ND MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONPWA-724,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER47.0 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 1
356117Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 356115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 356115?
356115 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace 356115?
There is 1 known substitute for 356115: 356117. Substitute compatibility should be verified for your specific system.
What is the NSN for 356115?
356115 is cataloged in the U.S. Government catalog under NSN 3110-00-677-7664. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 356115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.