3557856C1 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

3557856C1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 201 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 BAND, overall_width: 0.70 INCHES MINIMUM AND 0.74 INCHES MAXIMUM IN, style_designator: T-BOLT, surface_treatment: DICHROMATE ZINC BOLT, material_thickness: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN, nominal_thread_size: 0.250 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-567-0976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3557856C1

NSN: 5340-01-567-0976
FSC: 5340 — Hardware, Commercial
CAGE: 338X5 — ND DEFENSE LLC (USA)

SPECIFICATIONS

material	STEEL COMP 201 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 BAND
overall_width	0.70 INCHES MINIMUM AND 0.74 INCHES MAXIMUM IN
style_designator	T-BOLT
surface_treatment	DICHROMATE ZINC BOLT
material_thickness	0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
nominal_thread_size	0.250 INCHES IN
loop_inside_diameter	4.06 INCHES MINIMUM AND 4.56 INCHES MAXIMUM IN
fastening_device_type	T-BOLT
end_item_identification	MRAP - UNIQUE NSN - MAXXPRO CAT I
thread_quantity_per_inch	28
part_name_assigned_by_controlling_agency	CLAMP,HEAT EXCHANGER
NSN	5340-01-567-0976

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENING DEVICE TYPE: T-BOLT

•

STYLE DESIGNATOR: T-BOLT

•

MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN

•

NOMINAL THREAD SIZE: 0.250 INCHES IN

•

SURFACE TREATMENT: DICHROMATE ZINC BOLT

TECHNICAL CHARACTERISTICS

FASTENING DEVICE TYPE	T-BOLT
STYLE DESIGNATOR	T-BOLT
OVERALL WIDTH	0.70 INCHES MINIMUM AND 0.74 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
NOMINAL THREAD SIZE	0.250 INCHES IN
SPECIAL FEATURES	TRUNION AND WASHER MATERIAL: STEEL, ZINC PLATED YELLOW DICHROMATE; COMPRESSION SPRING MATERIAL: STEEL, ZINC PLATED; T-NUT: 1/4"-28 UNF-2B; T-BOLT: 1/4"-28 UNF-2A AND 4.25" LONG; DIMENSION MEASURED WITH CLAMP INSTALLED ON MINIMUM DIAMETER AT 65 POUNDS TORQUE A
SURFACE TREATMENT	DICHROMATE ZINC BOLT
SURFACE TREATMENT	DICHROMATE ZINC NUT
PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP,HEAT EXCHANGER
END ITEM IDENTIFICATION	MRAP - UNIQUE NSN - MAXXPRO CAT I

SUBSTITUTES & CROSS-REFERENCES 1

3557858C1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 3557856C1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3557856C1?

3557856C1 is a CLAMP,LOOP.

What parts can replace 3557856C1?

There is 1 known substitute for 3557856C1: 3557858C1. Substitute compatibility should be verified for your specific system.

What is the NSN for 3557856C1?

3557856C1 is cataloged in the U.S. Government catalog under NSN 5340-01-567-0976. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3557856C1 — CLAMP,LOOP

Request a Quote — 3557856C1