PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35546PC2
35546PC2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: COPPER ALLOY OVERALL, attachment_method: ROUND HOLE, rim_surface_width: 0.188 INCHES NOMINAL IN, peripheral_diameter: 2.875 INCHES NOMINAL IN, center_hole_diameter: 0.781 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-314-3923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35546PC2
NSN: 5330-00-314-3923
FSC: 5330
CAGE: 12067 — ROCKWELL INTL CORP GRAPHIC SYSTEMS DIV CUSTOMER PARTS/SERVICE (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialCOPPER ALLOY OVERALL
attachment_methodROUND HOLE
rim_surface_width0.188 INCHES NOMINAL IN
peripheral_diameter2.875 INCHES NOMINAL IN
center_hole_diameter0.781 INCHES NOMINAL IN
cross-sectional_height1.250 INCHES NOMINAL IN
attachment_hole_diameter0.250 INCHES NOMINAL IN
cross-sectional_thickness0.250 INCHES NOMINAL IN
attachment_feature_quantity4
flanged_body_outside_diameter1.625 INCHES NOMINAL IN
NSN5330-00-314-3923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35546PC2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.250 INCHES NOMINAL IN
•
ATTACHMENT METHOD: ROUND HOLE
•
MATERIAL: COPPER ALLOY OVERALL
•
CENTER HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.188 INCHES NOMINAL IN
•
ANGLE: 45.0 DEGREES NOMINAL
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
ATTACHMENT HOLE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT1.250 INCHES NOMINAL IN
ATTACHMENT METHODROUND HOLE
MATERIALCOPPER ALLOY OVERALL
CENTER HOLE DIAMETER0.781 INCHES NOMINAL IN
RIM SURFACE WIDTH0.188 INCHES NOMINAL IN
ANGLE45.0 DEGREES NOMINAL
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
ATTACHMENT HOLE DIAMETER0.250 INCHES NOMINAL IN
FLANGED BODY OUTSIDE DIAMETER1.625 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
NF-M-5#0Interchangeable
interchangeable cross-reference
interchangeable
31.570Interchangeable
interchangeable cross-reference
interchangeable
37724Interchangeable
interchangeable cross-reference
interchangeable
31570Interchangeable
interchangeable cross-reference
interchangeable
M1016-8Interchangeable
interchangeable cross-reference
interchangeable
7-199-002668Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35546PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35546PC2?
35546PC2 is a RETAINER,PACKING.
What parts can replace 35546PC2?
There are 9 known substitutes for 35546PC2: NF-M-5#0, 31.570, 37724 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35546PC2?
35546PC2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-314-3923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35546PC2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026