The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.250 INCHES NOMINAL IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.875 INCHES NOMINAL IN, features_provided: HERMETICALLY SEALED AND MONOLITHIC AND W/ENABLE, output_logic_form: COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC, inclosure_material: CERAMIC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-01-119-3881, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.250 INCHES NOMINAL IN |
| body_height | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| body_length | 0.875 INCHES NOMINAL IN |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND W/ENABLE |
| output_logic_form | COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC |
| inclosure_material | CERAMIC |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | 6 INPUT |
| inclosure_configuration | DUAL-IN-LINE |
| terminal_surface_treatment | SOLDER |
| terminal_type_and_quantity | 16 PRINTED CIRCUIT |
| NSN | 5962-01-119-3881 |
| CURRENT RATING PER CHARACTERISTIC | 1.00 MICROAMPERES NOMINAL SUPPLY |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| OUTPUT LOGIC FORM | COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC |
| BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS DEGC |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.5 VOLTS MINIMUM POWER SOURCE AND 18.5 VOLTS MAXIMUM POWER SOURCE |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| MAXIMUM POWER DISSIPATION RATING | 500.0 MILLIWATTS |
| TEST DATA DOCUMENT | 14933-81019 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |