PartsTable
Technical Data Sheet
Download PDF

35507508 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

35507508: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COTTON AND RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.250 INCHES NOMINAL IN, overall_length: 4.250 INCHES NOMINAL IN, special_features: ONE BOLT HOLE 0.438 IN. DIA LOCATED IN CENTER OF GASKET IN, style_designator: NON-CIRCULAR.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-460-1625, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35507508
NSN: 5330-00-460-1625
FSC: 5330 — Packing and Gasket Materials
CAGE: 33968 — CLARK EQUIPMENT CO DIV DOOSAN INFRACORE PORTABLE POWER (USA)
SPECIFICATIONS
materialCOTTON AND RUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.250 INCHES NOMINAL IN
overall_length4.250 INCHES NOMINAL IN
special_featuresONE BOLT HOLE 0.438 IN. DIA LOCATED IN CENTER OF GASKET IN
style_designatorNON-CIRCULAR
bolt_hole_quantity4
outside_corner_radius0.562 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.562 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.562 INCHES NOMINAL IN
NSN5330-00-460-1625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35507508 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH4.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESONE BOLT HOLE 0.438 IN. DIA LOCATED IN CENTER OF GASKET IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.562 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
35172923Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 35507508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35507508?
35507508 is a GASKET.
What parts can replace 35507508?
There is 1 known substitute for 35507508: 35172923. Substitute compatibility should be verified for your specific system.
What is the NSN for 35507508?
35507508 is cataloged in the U.S. Government catalog under NSN 5330-00-460-1625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35507508

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.