PartsTable
Technical Data Sheet
Download PDF

355-58A — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

355-58A: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, outside_diameter: 2.812 INCHES NOMINAL IN, special_features: FORMERLY AN IRPOD NSN, aperture_diameter: 1.062 INCHES NOMINAL IN, material_document_and_classification: ASTM F104 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-270-8470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
355-58A
NSN: 5330-00-270-8470
NIINs: 002708470, 012479393, 012801920
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPAPER OVERALL
outside_diameter2.812 INCHES NOMINAL IN
special_featuresFORMERLY AN IRPOD NSN
aperture_diameter1.062 INCHES NOMINAL IN
material_document_and_classificationASTM F104 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-270-8470
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 355-58A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIBER TYPE: ANIMAL OR PLANT
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND A CLASS
•
ENVIRONMENTAL PROTECTION: GASOLINE AND OIL RESISTANT AND WATER RESISTANT
•
WIDTH: 36.000 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
•
THICKNESS: 0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIBER TYPEANIMAL OR PLANT
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A CLASS
ENVIRONMENTAL PROTECTIONGASOLINE AND OIL RESISTANT AND WATER RESISTANT
WIDTH36.000 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
THICKNESS0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
F104Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
HH-P-0096 TY1CLAReference document
Same NSN cross-reference
Reference document — Secondary reference
AFB2894AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5330PL0678013Reference document
Same NSN cross-reference
Reference document — Informative reference only
K16-620Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
WDH-951GReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 355-58A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 355-58A?
355-58A is a GASKET.
What parts can replace 355-58A?
There are 10 known substitutes for 355-58A: F104, HH-P-0096 TY1CLA, AFB2894A and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 355-58A?
355-58A is cataloged in the U.S. Government catalog under NSN 5330-00-270-8470. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 355-58A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.