PartsTable
Technical Data Sheet
Download PDF

355-30 — TIE ROD,STEERING

✓ Government record, cited
Clementoni · GATE VALVE
PRODUCT OVERVIEW

355-30: TIE ROD,STEERING.

The TIE ROD,STEERING is a Clementoni industrial component. Key specifications include shape: BENT, material: STEEL CORROSION RESISTING, construction: TUBULAR, body_diameter: 1.000 INCHES NOMINAL IN, body_thickness: 0.187 INCHES NOMINAL IN, rod_end_lock_clamp: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 4810-00-541-1022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
355-30
NSN: 4810-00-541-1022
NIINs: 005411022, 010114419
FSC: 4810 — Valves, Powered
CAGE: H0203 — THALES NEDERLAND (NLD)
SPECIFICATIONS
shapeBENT
materialSTEEL CORROSION RESISTING
constructionTUBULAR
bend_quantity1
body_diameter1.000 INCHES NOMINAL IN
body_thickness0.187 INCHES NOMINAL IN
rod_end_lock_clampNOT INCLUDED
end_connection_typeBALL STUD LOCATION NOT OTHERWISE SPECIFIED
NSN4810-00-541-1022
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 355-30 · Clementoni ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
VOLTAGE IN VOLTS AND CURRENT TYPE: 115.0 DC
•
CONNECTION STYLE: PLAIN,OPTIONAL END(PIPE) ALL ENDS
•
MOUNTING POSITION: HORIZONTAL
•
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
•
OPERATING PRESSURE: 80.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
APERTURE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
VOLTAGE IN VOLTS AND CURRENT TYPE115.0 DC
CONNECTION STYLEPLAIN,OPTIONAL END(PIPE) ALL ENDS
MOUNTING POSITIONHORIZONTAL
CONNECTION TYPETHREADED INTERNAL PIPE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
OPERATING PRESSURE80.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
APERTURE DIAMETER0.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE0.125 INCHES ALL ENDS IN
SUBSTITUTES & CROSS-REFERENCES 2
8262A2Reference document
Same NSN cross-reference
Reference document — Secondary reference
02F20C1108AIFGC90Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 355-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 355-30?
355-30 is a TIE ROD,STEERING manufactured by Clementoni.
What parts can replace 355-30?
There are 2 known substitutes for 355-30: 8262A2, 02F20C1108AIFGC90. Substitute compatibility should be verified for your specific system.
What is the NSN for 355-30?
355-30 is cataloged in the U.S. Government catalog under NSN 4810-00-541-1022. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 355-30