PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 353202S
353202S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.800 INCHES NOMINAL IN, overall_height: 0.306 INCHES NOMINAL IN, overall_length: 1.315 INCHES NOMINAL IN, style_designator: CLIP, material_thickness: 0.072 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-769-7548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
353202S
NSN: 5340-00-769-7548
FSC: 5340
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.800 INCHES NOMINAL IN
overall_height0.306 INCHES NOMINAL IN
overall_length1.315 INCHES NOMINAL IN
style_designatorCLIP
material_thickness0.072 INCHES NOMINAL IN
NSN5340-00-769-7548
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 353202S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.072 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
STYLE DESIGNATOR: CLIP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.072 INCHES NOMINAL IN
OVERALL HEIGHT0.306 INCHES NOMINAL IN
MATERIALSTEEL
OVERALL WIDTH0.800 INCHES NOMINAL IN
STYLE DESIGNATORCLIP
OVERALL LENGTH1.315 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
A-3549Interchangeable
interchangeable cross-reference
interchangeable
A1935Interchangeable
interchangeable cross-reference
interchangeable
190Interchangeable
interchangeable cross-reference
interchangeable
181820-3Interchangeable
interchangeable cross-reference
interchangeable
6218Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 353202S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 353202S?
353202S is a RETAINER,NUT AND BOLT.
What parts can replace 353202S?
There are 5 known substitutes for 353202S: A-3549, A1935, 190 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 353202S?
353202S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-769-7548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 353202S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026