PartsTable
Technical Data Sheet
Download PDF

353020 — 353020

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

353020: 353020.

The 353020 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, overall_width: 0.058 INCHES NOMINAL IN, overall_height: 0.088 INCHES NOMINAL IN, overall_length: 0.500 INCHES NOMINAL IN, mounting_method: FORCE FIT, style_designator: SOCKET CONTACT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-182-4129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 353020
NSN: 5315-00-182-4129
NIINs: 001824129, 010638090
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 12027 — KLINE MANUFACTURING CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
overall_width0.058 INCHES NOMINAL IN
overall_height0.088 INCHES NOMINAL IN
overall_length0.500 INCHES NOMINAL IN
mounting_methodFORCE FIT
style_designatorSOCKET CONTACT
precious_materialGOLD
surface_treatmentGOLD AND NICKEL CONTACT
cable_entrance_diameter0.020 INCHES NOMINAL IN
terminal_type_and_quantity1 CRIMP END OPPOSITE CONTACT
precious_material_and_weight0.005 GOLD GRAINS, TROY
precious_material_and_locationOUTER SURFACES GOLD
NSN5315-00-182-4129
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 353020 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.031 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.218 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.875 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GROOVE
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.031 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.218 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.875 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.062 INCHES NOMINAL IN
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
DIAMETER0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 353020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 353020?
353020 is a 353020. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 353020?
353020 is cataloged in the U.S. Government catalog under NSN 5315-00-182-4129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 353020