PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 353-8503-230
353-8503-230 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, overall_length: 0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, overall_diameter: 0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-450-8526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
353-8503-230
NSN: 5961-00-450-8526
FSC: 5961
CAGE: 95105 — ROCKWELL COLLINS, INC. DIV COLLINS AEROSPACE - MISSION SYSTEMS (USA)
SPECIFICATIONS
materialGLASS ENCLOSURE
overall_length0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
overall_diameter0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/127 GOVERNMENT SPECIFICATION
voltage_tolerance_in_percent-5.0 TO 5.0
power_rating_per_characteristic400.0 MILLIWATTS MAXIMUM TOTAL POWER DISSIPATION
current_rating_per_characteristic20.00 MILLIAMPERES MAXIMUM VOLTAGE REGULATOR DIODE CURRENT
voltage_rating_in_volts_per_characteristic3.9 NOMINAL NOMINAL REGULATOR VOLTAGE
NSN5961-00-450-8526
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 353-8503-230 MFR OEM SEMICONDUCTOR DEVICE,DIODE
KEY FEATURES
•
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
•
TEST DATA DOCUMENT: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
VOLTAGE TOLERANCE IN PERCENT: -5.0 TO 5.0
•
MATERIAL: SILICON SEMICONDUCTOR
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 175.0 CELSIUS AMBIENT AIR DEGC
•
OVERALL DIAMETER: 0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
POWER RATING PER CHARACTERISTIC: 400.0 MILLIWATTS MAXIMUM TOTAL POWER DISSIPATION
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VOLTAGE TOLERANCE IN PERCENT-5.0 TO 5.0
MATERIALSILICON SEMICONDUCTOR
OVERALL LENGTH0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT175.0 CELSIUS AMBIENT AIR DEGC
OVERALL DIAMETER0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
POWER RATING PER CHARACTERISTIC400.0 MILLIWATTS MAXIMUM TOTAL POWER DISSIPATION
TERMINAL LENGTH1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
FEATURES PROVIDEDHERMETICALLY SEALED CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
10133216Interchangeable
interchangeable cross-reference
interchangeable
938D392-3Interchangeable
interchangeable cross-reference
interchangeable
DZ870402AInterchangeable
interchangeable cross-reference
interchangeable
JANTX1N748AInterchangeable
interchangeable cross-reference
interchangeable
1A20644H01Interchangeable
interchangeable cross-reference
interchangeable
JANTX1N748AAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 353-8503-230?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 353-8503-230?
353-8503-230 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 353-8503-230?
There are 12 known substitutes for 353-8503-230: 10133216, 938D392-3, DZ870402A and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 353-8503-230?
353-8503-230 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-450-8526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 353-8503-230

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026