PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35286
35286 ✓ Verified by PartsTable
3M · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The perfect way to get your message noticed, these self-adhesive, removable coloured notes have revolutionised home, school and office communication. Available in a wide variety of colours and designs, use them to organise your information, wherever you are. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-070-3722, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35286
NSN: 5340-01-070-3722
FSC: 5340
CAGE: 83311 — UNISON INDUSTRIES, LLC DBA UNISON INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
flow_angle90.0 DEGREES
leg_length0.875 INCHES NOMINAL FIRST END IN
seat_angle37.0 DEGREES FIRST END
thread_class3A SECOND END A
connection_typeTHREADED EXTERNAL TUBE SECOND END
connection_styleDOUBLE THREADED SECTION W/ GASKET AND LOCKNUT SEALING (BOSS) SECOND END
nominal_thread_size0.562 INCHES SECOND END IN
thread_series_designatorUNF SECOND END
nominal_outside_diameter_tube_accommodated0.480 INCHES SECOND END IN
NSN5340-01-070-3722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35286 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 302 ASSN STD 1ST MATERIAL RESPONSE AND AISI 304 ASSN STD 2ND MATERIAL RESPONSE
•
STOCK DIAMETER: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
•
WIDTH: 0.387 INCHES MINIMUM AND 0.461 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASEHARDENING INDICATORNOT CASEHARDENED
MATERIALSTEEL COMP 302 OR STEEL COMP 304
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 302 ASSN STD 1ST MATERIAL RESPONSE AND AISI 304 ASSN STD 2ND MATERIAL RESPONSE
OVERALL HEIGHT0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
STOCK DIAMETER0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
WIDTH0.387 INCHES MINIMUM AND 0.461 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
AA1807-11Interchangeable
interchangeable cross-reference
interchangeable
1147AS903-23Interchangeable
interchangeable cross-reference
interchangeable
35286Interchangeable
interchangeable cross-reference
interchangeable
6809-6-6Interchangeable
interchangeable cross-reference
interchangeable
P40185Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35286?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35286?
35286 is a BEARING,SLEEVE manufactured by 3M.
What parts can replace 35286?
There are 5 known substitutes for 35286: AA1807-11, 1147AS903-23, 35286 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35286?
35286 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-070-3722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35286

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026