PartsTable
Technical Data Sheet
PartsTable / MRO / 3526-10
3526-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SWITCH,PUSH-PULL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_width: 0.812 INCHES NOMINAL IN, body_height: 0.750 INCHES NOMINAL IN, body_length: 1.750 INCHES NOMINAL IN, hole_diameter: 0.670 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-020-3124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3526-10
NSN: 5310-00-020-3124
FSC: 5310
CAGE: 27637 — ERA MFG CO DIV OF OCEAN TECHNOLOGY INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_width0.812 INCHES NOMINAL IN
body_height0.750 INCHES NOMINAL IN
body_length1.750 INCHES NOMINAL IN
hole_diameter0.670 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height0.025 INCHES NOMINAL IN
outside_diameter0.860 INCHES NOMINAL IN
material_thickness0.010 INCHES NOMINAL IN
terminal_type_and_quantity2 SCREW
nonpile-up_contact_arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
maximum_voltage_rating_in_volts24.0 DC
NSN5310-00-020-3124
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3526-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.860 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.670 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING OVERALL
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
OUTSIDE DIAMETER0.860 INCHES NOMINAL IN
OVERALL HEIGHT0.025 INCHES NOMINAL IN
HOLE DIAMETER0.670 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
9052Interchangeable
interchangeable cross-reference
interchangeable
B9AF15520AInterchangeable
interchangeable cross-reference
interchangeable
A3526-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3526-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3526-10?
3526-10 is a SWITCH,PUSH-PULL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3526-10?
There are 3 known substitutes for 3526-10: 9052, B9AF15520A, A3526-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 3526-10?
3526-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-020-3124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3526-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026