352306: LEVER,REMOTE CONTROL.
The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include material: STEEL, bore_type: SPLINED, major_diameter: 0.391 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN, minor_diameter: 0.333 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN, spline_quantity: 17, special_features: ONE SPLINE OMITTED FOR LOCATING KEY; OFFSET HEIGHT: 0.060 IN. NOMINAL IN.
This part is cataloged in the U.S. Government catalog under NSN 3040-00-612-6302, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL |
| bore_type | SPLINED |
| major_diameter | 0.391 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN |
| minor_diameter | 0.333 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN |
| spline_quantity | 17 |
| special_features | ONE SPLINE OMITTED FOR LOCATING KEY; OFFSET HEIGHT: 0.060 IN. NOMINAL IN |
| style_designator | CLEVIS LINK END, SECURING HOLE(S) SHAFT END |
| link_end_thickness | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| shaft_end_thickness | 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| shaft_securing_method | SPLINE |
| link_end_hole_diameter | 0.126 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| distance_between_fork_inside_spread | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| NSN | 3040-00-612-6302 |
| LINK END THICKNESS | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| LINK END HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| SHAFT END THICKNESS | 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE |
| BORE TYPE | SPLINED |
| SHAFT SECURING METHOD | SPLINE |
| SPLINE QUANTITY | 17 |
| DISTANCE BETWEEN FORK INSIDE SPREAD | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.026 INCHES MINIMUM AND 1.036 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.