The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: SILICON SEMICONDUCTOR, overall_length: 0.405 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S), features_provided: HERMETICALLY SEALED CASE, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-825-8867, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | SILICON SEMICONDUCTOR |
| overall_length | 0.405 INCHES MAXIMUM IN |
| mounting_method | THREADED STUD(S) |
| features_provided | HERMETICALLY SEALED CASE |
| nominal_thread_size | 0.190 INCHES IN |
| thread_series_designator | UNF |
| mounting_facility_quantity | 1 |
| overall_width_across_flats | 0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| terminal_type_and_quantity | 1 TAB, SOLDER LUG AND 1 THREADED STUD |
| specification/standard_data | 81349-MIL-S-19500/104 GOVERNMENT SPECIFICATION |
| current_rating_per_characteristic | 10.00 AMPERES MAXIMUM FORWARD CURRENT, DC AND 3.30 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| voltage_rating_in_volts_per_characteristic | 750.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 600.0 MAXIMUM REVERSE VOLTAGE, PEAK |
| NSN | 5961-00-825-8867 |
| TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG AND 1 THREADED STUD |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-19500/104 GOVERNMENT SPECIFICATION |
| MATERIAL | SILICON SEMICONDUCTOR |
| TEST DATA DOCUMENT | 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NOMINAL THREAD SIZE | 0.190 INCHES IN |
| OVERALL LENGTH | 0.405 INCHES MAXIMUM IN |
| OVERALL WIDTH ACROSS FLATS | 0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| CURRENT RATING PER CHARACTERISTIC | 10.00 AMPERES MAXIMUM FORWARD CURRENT, DC AND 3.30 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 750.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 600.0 MAXIMUM REVERSE VOLTAGE, PEAK |
| MOUNTING METHOD | THREADED STUD(S) |