PartsTable
Technical Data Sheet
Download PDF

352205 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited
Legrand · ORING SEAL
PRODUCT OVERVIEW

352205: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include material: ALUMINUM ALLOY 2014 OVERALL, hinge_pin: NOT INCLUDED, body_width: 11.210 INCHES NOMINAL IN, leaf_width: 1.230 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, knuckle_type: BALL BEARING, overall_length: 20.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-587-4308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
352205
NSN: 5340-00-587-4308
NIINs: 005874308, 016436774
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OVERALL
hinge_pinNOT INCLUDED
body_width11.210 INCHES NOMINAL IN
leaf_width1.230 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
knuckle_typeBALL BEARING
overall_length20.750 INCHES NOMINAL IN
knuckle_quantity1
special_featuresMODEL C-130
style_designatorPLATE
reversible_featureNOT INCLUDED
mounting_hole_diameter0.196 INCHES NOMINAL IN
knuckle_inside_diameter1.760 INCHES NOMINAL IN
NSN5340-00-587-4308
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 352205 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 1.760 INCHES NOMINAL IN
•
BODY WIDTH: 11.210 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PLATE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/2, ALLOY 2014, T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.196 INCHES NOMINAL IN
•
HINGE PIN: NOT INCLUDED
TECHNICAL CHARACTERISTICS
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER1.760 INCHES NOMINAL IN
BODY WIDTH11.210 INCHES NOMINAL IN
STYLE DESIGNATORPLATE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2, ALLOY 2014, T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.196 INCHES NOMINAL IN
OVERALL LENGTH20.750 INCHES NOMINAL IN
HINGE PINNOT INCLUDED
LEAF WIDTH1.230 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
KNUCKLE QUANTITY1
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 352205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 352205?
352205 is a SUPPORT,STRUCTURAL COMPONENT,AIR manufactured by Legrand.
What is the NSN for 352205?
352205 is cataloged in the U.S. Government catalog under NSN 5340-00-587-4308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 352205

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.