PartsTable
Technical Data Sheet
Download PDF

352106 NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

352106 NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN, overall_length: 1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, outside_corner_radius: 0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, cross-sectional_thickness: 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-394-3503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
352106 NON-ASBESTOS
NSN: 5330-01-394-3503
FSC: 5330 — Packing and Gasket Materials
CAGE: 59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)
SPECIFICATIONS
hole_diameter0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
overall_length1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity4
outside_corner_radius0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
cross-sectional_thickness0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
outside_edge_to_bolt_hole_center_distance_along_width0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-394-3503
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 352106 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 352106 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 352106 NON-ASBESTOS?
352106 NON-ASBESTOS is a GASKET.
What is the NSN for 352106 NON-ASBESTOS?
352106 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-394-3503. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 352106 NON-ASBESTOS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.