PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3521-6
3521-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, point_type: SPLIT, fitted_case: PROVIDED, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, contact_type: BUTTON. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-189-9424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3521-6
NSN: 5330-00-189-9424
FSC: 5330
CAGE: 18565 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CHOMERICS DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeSPLIT
fitted_casePROVIDED
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
contact_typeBUTTON
flute_length1.062 INCHES NOMINAL IN
hole_diameter0.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.188 INCHES NOMINAL IN
flute_quantity2
overall_length2.125 INCHES NOMINAL IN
shank_diameter0.159 INCHES NOMINAL IN
NSN5330-00-189-9424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3521-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: FIBRE OR COMPOSITION WITH WIRE INSERT
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-5847,CL 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEFIBRE OR COMPOSITION WITH WIRE INSERT
OVERALL LENGTH1.188 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-5847,CL 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE INSERT
MATERIALNICKEL ALLOY 400 INSERT
APERTURE DIAMETER0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
51863Interchangeable
interchangeable cross-reference
interchangeable
R26343Interchangeable
interchangeable cross-reference
interchangeable
R1885SNInterchangeable
interchangeable cross-reference
interchangeable
35.216Interchangeable
interchangeable cross-reference
interchangeable
2068Interchangeable
interchangeable cross-reference
interchangeable
8806Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3521-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3521-6?
3521-6 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 3521-6?
There are 14 known substitutes for 3521-6: 51863, R26343, R1885SN and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3521-6?
3521-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-189-9424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3521-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026