The TEE,TUBE is a the manufacturer industrial component. Key specifications include leg_length: 88.9 MILLIMETERS MINIMUM AND 91.9 MILLIMETERS MAXIMUM ALL ENDS MM, bearing_type: ANNULAR BALL, NONREMOVABLE, inlet_location: LEFT-HAND SIDE FIRST INLET, operating_pressure: 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE LBS, part_name_assigned_by_controlling_agency: DOUBLE CHECK TEE. This part is cataloged in the U.S.
Government catalog under NSN 4730-01-701-7464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
35201007-2
NSN:4730-01-701-7464 FSC:4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings CAGE:05167 — MEGGITT SAFETY SYSTEMS INC (USA)
SPECIFICATIONS
leg_length
88.9 MILLIMETERS MINIMUM AND 91.9 MILLIMETERS MAXIMUM ALL ENDS MM
bearing_type
ANNULAR BALL, NONREMOVABLE
inlet_location
LEFT-HAND SIDE FIRST INLET
operating_pressure
300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE LBS
part_name_assigned_by_controlling_agency
DOUBLE CHECK TEE
NSN
4730-01-701-7464
COMPONENT DIAGRAM
KEY FEATURES
•
INLET LOCATION: LEFT-HAND SIDE FIRST INLET
•
OPERATING PRESSURE: 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE LBS
•
LEG LENGTH: 88.9 MILLIMETERS MINIMUM AND 91.9 MILLIMETERS MAXIMUM ALL ENDS MM
•
BEARING TYPE: ANNULAR BALL, NONREMOVABLE
TECHNICAL CHARACTERISTICS
INLET LOCATION
LEFT-HAND SIDE FIRST INLET
INLET LOCATION
RIGHT-HAND SIDE SECOND INLET
OPERATING PRESSURE
300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE LBS
OPERATING PRESSURE
250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
OPERATING PRESSURE
1724.0 KILOPASCALS (KPA) MAXIMUM THIRD RESPONSE
OPERATING PRESSURE
2069.0 KILOPASCALS (KPA) MAXIMUM FOURTH RESPONSE
LEG LENGTH
88.9 MILLIMETERS MINIMUM AND 91.9 MILLIMETERS MAXIMUM ALL ENDS MM
BEARING TYPE
ANNULAR BALL, NONREMOVABLE
SPECIAL FEATURES
THE DOUBLE CHECK TEE CONNECTS TWO SEPARATE SUPPLY LINES WITH ONE COMMON DISTRIBUTION LINE. THE DOUBLE CHECK TEE CONSISTS OF A BODY WITH TWO THREADED INLET PORTS, ONE THREADED OUTLET PORT, AND A BALL CHECK. THE DOUBLE CHECK TEE ALLOWS AGENT FLOW FROM AN INLET END WHICH SHUTTLES THE BALL CHECK TO SEAT AND BLOCK AGENT FLOW AT THE OPPOSITE INLET END, WHILE THE OUTLET END REMAINS OPEN. TEST PRESSURE: 250 TO 300 PSIG (1724 TO 2069 KPAG). MIN BURST PRESSURE: 5000 PSIG (34475 KPAG). WEIGHT: 0.40 POUNDS (0.18 KG) MAXIMUM. LBS
PART NAME ASSIGNED BY CONTROLLING AGENCY
DOUBLE CHECK TEE
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35201007-2?
35201007-2 is a TEE,TUBE.
What parts can replace 35201007-2?
There is 1 known substitute for 35201007-2: 26-21-34 REV 3. Substitute compatibility should be verified for your specific system.
What is the NSN for 35201007-2?
35201007-2 is cataloged in the U.S. Government catalog under NSN 4730-01-701-7464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.