PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3515-14-13
3515-14-13 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, hole_diameter: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, overall_height: 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN, outside_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, material_thickness: 0.022 INCHES NOMINAL IN, material_document_and_classification: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-103-2953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3515-14-13
NSN: 5310-00-103-2953
FSC: 5310
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
hole_diameter0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
overall_height0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
outside_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
material_thickness0.022 INCHES NOMINAL IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-103-2953
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3515-14-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 410 OVERALL
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
MATERIALSTEEL COMP 410 OVERALL
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
OUTSIDE DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
HOLE DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
202734Interchangeable
interchangeable cross-reference
interchangeable
AS-462A/GMD-1Interchangeable
interchangeable cross-reference
interchangeable
SM-C-426565Interchangeable
interchangeable cross-reference
interchangeable
SC-B-70017-10Interchangeable
interchangeable cross-reference
interchangeable
SC-D-70016-10Interchangeable
interchangeable cross-reference
interchangeable
923289Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3515-14-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3515-14-13?
3515-14-13 is a WASHER,SPRING TENSION.
What parts can replace 3515-14-13?
There are 15 known substitutes for 3515-14-13: 202734, AS-462A/GMD-1, SM-C-426565 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3515-14-13?
3515-14-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-103-2953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3515-14-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026