PartsTable
Technical Data Sheet
Download PDF

3515-14-11 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3515-14-11: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN, overall_height: 0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN, outside_diameter: 0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.006 INCHES NOMINAL0.006 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-025-1797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3515-14-11
NSN: 5310-01-025-1797
FSC: 5310 — Nuts and Washers
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
overall_height0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
outside_diameter0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.006 INCHES NOMINAL0.006 INCHES NOMINAL IN
material_document_and_classificationSAE 1065 THRU 1090 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-025-1797
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3515-14-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1065 THRU 1090 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.006 INCHES NOMINAL0.006 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1065 THRU 1090 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.006 INCHES NOMINAL0.006 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 4
5310PL1781053Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310PL0739881Reference document
Same NSN cross-reference
Reference document — Informative reference only
2441710-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
0188-2-3076Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3515-14-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3515-14-11?
3515-14-11 is a WASHER,SPRING TENSION.
What parts can replace 3515-14-11?
There are 4 known substitutes for 3515-14-11: 5310PL1781053, 5310PL0739881, 2441710-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3515-14-11?
3515-14-11 is cataloged in the U.S. Government catalog under NSN 5310-01-025-1797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3515-14-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.