PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35116-C
35116-C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include overall_width: 4.938 INCHES NOMINAL IN, style_designator: IRREGULAR, accommodated_item_securing_device_type: SCREW FASTENER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-1120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35116-C
NSN: 5330-00-641-1120
FSC: 5330
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
overall_width4.938 INCHES NOMINAL IN
style_designatorIRREGULAR
accommodated_item_securing_device_typeSCREW FASTENER
NSN5330-00-641-1120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35116-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.250 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
PERIPHERAL DIAMETER: 1.7202 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.250 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECUP
PERIPHERAL DIAMETER1.7202 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
RR-C-271Interchangeable
interchangeable cross-reference
interchangeable
F271-C1-4Z10Interchangeable
interchangeable cross-reference
interchangeable
RRC271 TY 1 CL 4 GRD CInterchangeable
interchangeable cross-reference
interchangeable
2965Interchangeable
interchangeable cross-reference
interchangeable
SA 11898Interchangeable
interchangeable cross-reference
interchangeable
L0-188Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35116-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35116-C?
35116-C is a RETAINER,PACKING.
What parts can replace 35116-C?
There are 20 known substitutes for 35116-C: RR-C-271, F271-C1-4Z10, RRC271 TY 1 CL 4 GRD C and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35116-C?
35116-C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-1120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35116-C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026