PartsTable
Technical Data Sheet
Download PDF

35104-2 — TRANSFORMER,POWER

✓ Government record, cited
Legrand · NUT WASHER
PRODUCT OVERVIEW

35104-2: TRANSFORMER,POWER.

The TRANSFORMER,POWER is a Legrand industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_width: 3.125 INCHES NOMINAL IN, body_height: 4.812 INCHES NOMINAL IN, body_length: 4.250 INCHES NOMINAL IN, hole_diameter: 0.130 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-864-5062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35104-2
NSN: 5310-00-864-5062
NIINs: 008645062, 010400515, 011736452, 013661045
FSC: 5310 — Nuts and Washers
CAGE: 99932 — MOOG INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_width3.125 INCHES NOMINAL IN
body_height4.812 INCHES NOMINAL IN
body_length4.250 INCHES NOMINAL IN
hole_diameter0.130 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating47.0 HERTZ MINIMUM AND 440.0 HERTZ MAXIMUM SINGLE COMPONENT
outside_diameter0.395 INCHES NOMINAL IN
special_featuresTWO SEPARATE TERMINALS @BROUGHT OUT TO SHIELD
shoulder_diameter0.333 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
NSN5310-00-864-5062
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 35104-2 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.395 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.333 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.130 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER0.395 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
SHOULDER DIAMETER0.333 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.130 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 35104-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35104-2?
35104-2 is a TRANSFORMER,POWER manufactured by Legrand.
What is the NSN for 35104-2?
35104-2 is cataloged in the U.S. Government catalog under NSN 5310-00-864-5062. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35104-2