PartsTable
Technical Data Sheet

351-1/2 — LIGHT ASSEMBLY,INDICATOR

✓ Government record, cited
Clementoni · MRO · MRO_GENERAL
PRODUCT OVERVIEW

351-1/2: LIGHT ASSEMBLY,INDICATOR.

The LIGHT ASSEMBLY,INDICATOR is a Clementoni industrial component. Key specifications include style_designator: TRACHEAL W/ CUFF, design_designation: ENDOTRACHEAL, tube_inside_diameter: 3.5 MILLIMETERS MM, tube_outside_diameter: 5.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-173-3988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 351-1/2
NSN: 5340-00-173-3988
NIINs: 001733988, 008231581, 011237799, 011301853, 014073712, 017293795
FSC: 5340 — Hardware, Commercial
CAGE: 80256 — OUTBOARD MARINE CORP (USA)
SPECIFICATIONS
style_designatorTRACHEAL W/ CUFF
design_designationENDOTRACHEAL
tube_inside_diameter3.5 MILLIMETERS MM
tube_outside_diameter5.0 MILLIMETERS NOMINAL MM
NSN5340-00-173-3988
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 351-1/2 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0179 INCHES NOMINAL IN
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
LENGTH1.281 INCHES NOMINAL IN
MATERIAL THICKNESS0.0179 INCHES NOMINAL IN
WIDTH0.500 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
A0-548Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 351-1/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 351-1/2?
351-1/2 is a LIGHT ASSEMBLY,INDICATOR manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 351-1/2?
There is 1 known substitute for 351-1/2: A0-548. Substitute compatibility should be verified for your specific system.
What is the NSN for 351-1/2?
351-1/2 is cataloged in the U.S. Government catalog under NSN 5340-00-173-3988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 351-1/2