PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 350906
350906 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, shank_length: 0.200 INCHES NOMINAL IN, overall_height: 1.100 INCHES NOMINAL IN, shank_diameter: 1.000 INCHES NOMINAL IN, style_designator: CHAMFERED FLANGE, outside/top_flange_diameter: 1.380 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-279-4129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
350906
NSN: 5340-00-279-4129
FSC: 5340
CAGE: 81306 — WHIRLPOOL CORP DBA WHIRLPOOL CORP (USA)
SPECIFICATIONS
materialRUBBER
shank_length0.200 INCHES NOMINAL IN
overall_height1.100 INCHES NOMINAL IN
shank_diameter1.000 INCHES NOMINAL IN
style_designatorCHAMFERED FLANGE
outside/top_flange_diameter1.380 INCHES NOMINAL IN
NSN5340-00-279-4129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 350906 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CHAMFERED FLANGE
•
OUTSIDE/TOP FLANGE DIAMETER: 1.380 INCHES NOMINAL IN
•
SHANK LENGTH: 0.200 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS (FLIS)
SHANK DIAMETER1.000 INCHES NOMINAL IN
STYLE DESIGNATORCHAMFERED FLANGE
OUTSIDE/TOP FLANGE DIAMETER1.380 INCHES NOMINAL IN
SHANK LENGTH0.200 INCHES NOMINAL IN
OVERALL HEIGHT1.100 INCHES NOMINAL IN
MATERIALRUBBER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
93-061Interchangeable
interchangeable cross-reference
interchangeable
814Interchangeable
interchangeable cross-reference
interchangeable
94-10-3-2Interchangeable
interchangeable cross-reference
interchangeable
DRASHInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 350906?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 350906?
350906 is a BUMPER.
What parts can replace 350906?
There are 4 known substitutes for 350906: 93-061, 814, 94-10-3-2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 350906?
350906 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-279-4129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 350906

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026