PartsTable
Technical Data Sheet
Download PDF

350902 — HOUSING,DRAG PARACHUTE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

350902: HOUSING,DRAG PARACHUTE.

The HOUSING,DRAG PARACHUTE is a the manufacturer industrial component. Key specifications include end_connection_design: STRAIGHT ALL ENDS, end_item_identification: OUTBOARD MOTOR FUEL SYSTEM, inside_surface_condition: SMOOTH, media_for_which_designed: FUEL SINGLE RESPONSE, cross-sectional_shape_style: ROUND, part_name_assigned_by_controlling_agency: FUEL PORESSURE TEST ADAPTER(HIGH). This part is cataloged in the U.S.

Government catalog under NSN 5330-00-297-4566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
350902
NSN: 5330-00-297-4566
NIINs: 002974566, 009153029, 011483543, 014744951, 016185685, 016896139
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
end_connection_designSTRAIGHT ALL ENDS
end_item_identificationOUTBOARD MOTOR FUEL SYSTEM
inside_surface_conditionSMOOTH
media_for_which_designedFUEL SINGLE RESPONSE
cross-sectional_shape_styleROUND
part_name_assigned_by_controlling_agencyFUEL PORESSURE TEST ADAPTER(HIGH)
NSN5330-00-297-4566
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 350902 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.188 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.188 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 4
63X0387Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
8635040-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
353193Reference document
Same NSN cross-reference
Reference document — Secondary reference
209341Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 350902?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 350902?
350902 is a HOUSING,DRAG PARACHUTE.
What parts can replace 350902?
There are 4 known substitutes for 350902: 63X0387, 8635040-2, 353193 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 350902?
350902 is cataloged in the U.S. Government catalog under NSN 5330-00-297-4566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 350902