3506-SC37A-C3C — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

3506-SC37A-C3C: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, material: STEEL COMP 1118 STUD, drive_type: SLOTTED, eyelet_length: 0.080 INCHES NOMINAL IN, stud_diameter: 0.212 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, special_features: D IN P/N SMOOTH FINI. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-396-8336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3506-SC37A-C3C

NSN: 5325-01-396-8336
FSC: 5325 — Fastening Devices
CAGE: 72794 — SOUTHCO INC (USA)

SPECIFICATIONS

diameter	0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
material	STEEL COMP 1118 STUD
drive_type	SLOTTED
eyelet_length	0.080 INCHES NOMINAL IN
stud_diameter	0.212 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
special_features	D IN P/N SMOOTH FINI
stud_head_height	0.285 INCHES NOMINAL IN
surface_treatment	CADMIUM AND PRIMER OVERALL
stud_assembly_style	STUD ASSEMBLY
securing_device_type	SPRING
eyelet_outside_diameter	0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
turnlock_stud_head_style	FLAT FILLISTER
NSN	5325-01-396-8336

COMPONENT DIAGRAM

KEY FEATURES

•

EYELET OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN

•

DRIVE TYPE: SLOTTED

•

MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING

•

DIAMETER: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN

•

STUD HEAD HEIGHT: 0.285 INCHES NOMINAL IN

•

SECURING DEVICE TYPE: SPRING

TECHNICAL CHARACTERISTICS

EYELET OUTSIDE DIAMETER	0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
DRIVE TYPE	SLOTTED
MATERIAL ACCOMMODATED THICKNESS	0.064 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE STUD
DIAMETER	0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
STUD HEAD HEIGHT	0.285 INCHES NOMINAL IN
SECURING DEVICE TYPE	SPRING
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD	0.380 INCHES NOMINAL IN
TURNLOCK STUD HEAD STYLE	FLAT FILLISTER

SUBSTITUTES & CROSS-REFERENCES 3

PFSC35-37AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

PFSC35-38ADSEBReference document

Same NSN cross-reference

Reference document — Design control — primary reference

X1243Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 3506-SC37A-C3C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3506-SC37A-C3C?

3506-SC37A-C3C is a STUD ASSEMBLY,TURNLOCK FASTENER.

What parts can replace 3506-SC37A-C3C?

There are 3 known substitutes for 3506-SC37A-C3C: PFSC35-37A, PFSC35-38ADSEB, X1243. Substitute compatibility should be verified for your specific system.

What is the NSN for 3506-SC37A-C3C?

3506-SC37A-C3C is cataloged in the U.S. Government catalog under NSN 5325-01-396-8336. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3506-SC37A-C3C — STUD ASSEMBLY,TURNLOCK FASTENER

Request a Quote — 3506-SC37A-C3C