PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35041
35041 ✓ Verified by PartsTable
Clementoni · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

500-piece jigsaw puzzle for adults<br><br>Size of completed jigsaw puzzle: 49 x 36 cm<br><br>The most appealing images, the greatest variety of sizes and signature Clementoni quality for a range that is a gold standard for jigsaw lovers everywhere.<br><br>Acutely attuned to the importance of environmental awareness, Clementoni makes extensive use of recycled materials and avoids any components containing pollutants. Made in Italy.<br><br>Visit Clementoni's support section to benefit from the “lost pieces” service<br> This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-1612, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
35041
NSN: 3110-00-120-1612
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialALUMINUM LOCATION NOT OTHERWISE SPECIFIED
cup_width2.1250 INCHES NOMINAL IN
design_typeTRAILER
bore_diameter2.7559 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
overall_length2.440 INCHES NOMINAL IN
standout_width0.2188 INCHES NOMINAL IN
special_featuresSTRAIN RELIEF CLAMP FOR 10 TO 26 CONDUCTORS
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, NON-ADJUSTABLE
cone_corner_radius0.1400 INCHES NOMINAL IN
length_adjustabilityNONADJUSTABLE
NSN3110-00-120-1612
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 35041 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.7559 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDOUT WIDTH: 0.2188 INCHES NOMINAL IN
•
CUP WIDTH: 2.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, DOUBLE CUP, SINGLE CONES, NON-ADJUSTABLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.7559 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
OVERALL WIDTH2.5626 INCHES NOMINAL IN
CUP WIDTH2.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, NON-ADJUSTABLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESOPERATING TEMPERATURE NORT TO EXCEED 121 DEG C/250 DEG F; OIL HOLE AND GROOVE IN CUP DEGC
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
NA569-563DInterchangeable
interchangeable cross-reference
interchangeable
A-A-59656Interchangeable
interchangeable cross-reference
interchangeable
68C01086Interchangeable
interchangeable cross-reference
interchangeable
K60-199AInterchangeable
interchangeable cross-reference
interchangeable
K60-199Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35041?
35041 is a CLAMP,CABLE,ELECTRICAL CONNECTOR manufactured by Clementoni.
What parts can replace 35041?
There are 21 known substitutes for 35041: NA569-563D, A-A-59656, 68C01086 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35041?
35041 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-1612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35041

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026