PartsTable
Technical Data Sheet
Download PDF

35029PC20 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

35029PC20: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include material: COPPER, hole_diameter: 0.312 INCHES NOMINAL IN, special_features: WITH RETAINER NUT, securing_device_type: THREADED FASTENER, peripheral_shape_style: ROUND, ONE HOLE, cross-sectional_shape_style: SQUARE OR RECTANGULAR RECESS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-036-3612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35029PC20
NSN: 5340-00-036-3612
FSC: 5340 — Hardware, Commercial
CAGE: 73370 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP (USA)
SPECIFICATIONS
materialCOPPER
hole_diameter0.312 INCHES NOMINAL IN
special_featuresWITH RETAINER NUT
securing_device_typeTHREADED FASTENER
peripheral_shape_styleROUND, ONE HOLE
cross-sectional_shape_styleSQUARE OR RECTANGULAR RECESS
mounting_opening_shape_styleUNTHREADED HOLE
NSN5340-00-036-3612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35029PC20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE OR RECTANGULAR RECESS
•
SECURING DEVICE TYPE: THREADED FASTENER
•
PERIPHERAL SHAPE STYLE: ROUND, ONE HOLE
•
MATERIAL: COPPER
•
HOLE DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
CROSS-SECTIONAL SHAPE STYLESQUARE OR RECTANGULAR RECESS
SECURING DEVICE TYPETHREADED FASTENER
SPECIAL FEATURESWITH RETAINER NUT
PERIPHERAL SHAPE STYLEROUND, ONE HOLE
END ITEM IDENTIFICATIONW/S:GENRATOR SET, 30KW, 60 HZ, SKID MOUNTED (3ID)(MEP-007A); FMS-BUILD BRIGATES CLASS SHIPS; GENERATOR SET, TACT QUIET, 60KW, 400HZ, MEP-816A; FIRE PUMPS; FORRESTAL CLASS CV; RADAR SET, LIGHTWEIGHT 3D (AN/TPS-59); GENERATOR SET, 60KW, 60 HZ, SKID MOUNTED (2ID)(MEP-006A); GENERATOR SET, DIESEL ENGINE, 100KW, PU-495; GENERATOR, 60KW, DIESEL, MILITARY STANDARD FAMILY A
MATERIALCOPPER
HOLE DIAMETER0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
F26BReference document
Same NSN cross-reference
Reference document — Secondary reference
35064PC22Reference document
Same NSN cross-reference
Reference document — Secondary reference
35066Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 35029PC20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35029PC20?
35029PC20 is a COVER,ACCESS.
What parts can replace 35029PC20?
There are 3 known substitutes for 35029PC20: F26B, 35064PC22, 35066. Substitute compatibility should be verified for your specific system.
What is the NSN for 35029PC20?
35029PC20 is cataloged in the U.S. Government catalog under NSN 5340-00-036-3612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35029PC20