PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 350212A
350212A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 3.501 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.360 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-772-0161, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
350212A
NSN: 5330-00-772-0161
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter3.501 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.360 INCHES NOMINAL IN
NSN5330-00-772-0161
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 350212A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 3.501 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.360 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
HOUSING BORE DIAMETER3.501 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.360 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
A31-1-1Interchangeable
interchangeable cross-reference
interchangeable
9431-1-1Interchangeable
interchangeable cross-reference
interchangeable
48793Interchangeable
interchangeable cross-reference
interchangeable
60898Interchangeable
interchangeable cross-reference
interchangeable
1228016P5Interchangeable
interchangeable cross-reference
interchangeable
AD30NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 350212A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 350212A?
350212A is a SEAL,PLAIN ENCASED.
What parts can replace 350212A?
There are 9 known substitutes for 350212A: A31-1-1, 9431-1-1, 48793 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 350212A?
350212A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-772-0161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 350212A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026