3500S-D55-303 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

3500S-D55-303: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT, shaft_length: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, shaft_runout: 0.002 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-316-8946, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 3500S-D55-303

NSN: 5905-01-316-8946
FSC: 5905 — Resistor
CAGE: 80294 — BOURNS INSTRUMENTS INC (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
bearing_type	SLEEVE SHAFT
shaft_length	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
shaft_runout	0.002 INCHES IN
actuator_type	SINGLE SHAFT
body_diameter	0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
cubic_measure	0.608 CUBIC INCHES
lateral_runout	0.005 INCHES IN
shaft_diameter	0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM IN
shaft_end_play	0.005 INCHES IN
NSN	5905-01-316-8946

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 0.60 INCH-OUNCES IN

•

BODY DIAMETER: 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

LATERAL RUNOUT: 0.005 INCHES IN

•

ELECTRICAL RESISTANCE PER SECTION: 30.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	0.60 INCH-OUNCES IN
BODY DIAMETER	0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
LATERAL RUNOUT	0.005 INCHES IN
ELECTRICAL RESISTANCE PER SECTION	30.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM IN
FRAGILITY FACTOR	MODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 1

579R898H10Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 3500S-D55-303?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3500S-D55-303?

3500S-D55-303 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).

What parts can replace 3500S-D55-303?

There is 1 known substitute for 3500S-D55-303: 579R898H10. Substitute compatibility should be verified for your specific system.

What is the NSN for 3500S-D55-303?

3500S-D55-303 is cataloged in the U.S. Government catalog under NSN 5905-01-316-8946. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3500S-D55-303 — RESISTOR,VARIABLE,WIRE WOUND,PRE

Request a Quote — 3500S-D55-303