PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 350-3927-09-07
350-3927-09-07 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, style_designator: PROJECTION ONE END, width_across_flats: 0.250 INCHES NOMINAL IN, cross-sectional_shape: HEXAGON, left_counterbore_depth: 0.109 INCHES NOMINAL IN, left_counterbore_diameter: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-495-3356, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
350-3927-09-07
NSN: 5340-00-495-3356
FSC: 5340
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
length0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
style_designatorPROJECTION ONE END
width_across_flats0.250 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
left_counterbore_depth0.109 INCHES NOMINAL IN
left_counterbore_diameter0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
NSN5340-00-495-3356
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 350-3927-09-07 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
LEFT COUNTERBORE DIAMETER: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PROJECTION ONE END
•
LEFT COUNTERBORE DEPTH: 0.109 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
•
LENGTH: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
LEFT COUNTERBORE DIAMETER0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
STYLE DESIGNATORPROJECTION ONE END
LEFT COUNTERBORE DEPTH0.109 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGON
LENGTH0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
00044Interchangeable
interchangeable cross-reference
interchangeable
L3418Interchangeable
interchangeable cross-reference
interchangeable
455034K69Interchangeable
interchangeable cross-reference
interchangeable
GA51122Interchangeable
interchangeable cross-reference
interchangeable
SCC63173Interchangeable
interchangeable cross-reference
interchangeable
39279Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 350-3927-09-07?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 350-3927-09-07?
350-3927-09-07 is a STANDOFF,THREADED,SPACING.
What parts can replace 350-3927-09-07?
There are 9 known substitutes for 350-3927-09-07: 00044, L3418, 455034K69 and 6 more. Substitute compatibility should be verified for your specific system.
Is 350-3927-09-07 still available?
350-3927-09-07 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 350-3927-09-07

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026