PartsTable
Technical Data Sheet
Download PDF

35-820132 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

35-820132: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, shank_length: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, overall_length: 3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN, shank_diameter: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN, surface_finish: 16.0 MICROINCHES SHANK END, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-286-4344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35-820132
NSN: 5315-00-286-4344
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 70898 — BEECHCRAFT CORPORATION DBA TEXTRON AVIATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
shank_length0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
overall_length3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN
shank_diameter0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
surface_finish16.0 MICROINCHES SHANK END
first_end_styleCHAMFERED
style_designatorSHOULDER
shoulder_diameter0.3725 INCHES MINIMUM AND 0.3735 INCHES MAXIMUM IN
surface_treatmentCHROMIUM OVERALL
first_end_locationBOTH ENDS
first_hole_diameter0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
second_shank_length0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
NSN5315-00-286-4344
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 35-820132 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
SURFACE FINISH: 16.0 MICROINCHES SHANK END
•
FIRST END TAPER LENGTH: 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-6871 TYPE 2 CLASS B (CANCELLED) MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
SURFACE FINISH16.0 MICROINCHES SHANK END
FIRST END TAPER LENGTH0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-6871 TYPE 2 CLASS B (CANCELLED) MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
SHANK LENGTH0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
60-820029-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 35-820132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35-820132?
35-820132 is a PIN,SHOULDER,HEADLESS.
What parts can replace 35-820132?
There is 1 known substitute for 35-820132: 60-820029-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 35-820132?
35-820132 is cataloged in the U.S. Government catalog under NSN 5315-00-286-4344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35-820132

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.