35-18-2-4-3 — 35-18-2-4-3

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

35-18-2-4-3: 35-18-2-4-3.

The 35-18-2-4-3 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 172, body_style: SINGLE FLAIR ENTRY, overall_width: 0.330 INCHES NOMINAL IN, overall_height: 0.180 INCHES NOMINAL IN, overall_length: 1.080 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN, unthreaded_mounting_hole_diameter: 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM ALL MOUNTING FACILITIES IN. This part is cataloged in the U.S.

Government catalog under NSN 5998-01-070-6626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 35-18-2-4-3

NSN: 5998-01-070-6626
FSC: 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
CAGE: 18915 — PEP WEST, INC. DBA PENTAIR TECHNICAL PRODUCTS USE CAGE CODE 61081 FOR CATALOGING DIV PENTAIR TECHNICAL PRODUCTS (USA)

SPECIFICATIONS

material	COPPER ALLOY 172
body_style	SINGLE FLAIR ENTRY
overall_width	0.330 INCHES NOMINAL IN
overall_height	0.180 INCHES NOMINAL IN
overall_length	1.080 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
unthreaded_mounting_hole_diameter	0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM ALL MOUNTING FACILITIES IN
mounting_facility_type_and_quantity	2 UNTHREADED HOLE(S) ALL MOUNTING FACILITIES
material_document_and_classification	QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE
NSN	5998-01-070-6626

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE(S) ALL MOUNTING FACILITIES

•

BODY STYLE: SINGLE FLAIR ENTRY

•

UNTHREADED MOUNTING HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM ALL MOUNTING FACILITIES IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE

•

MATERIAL: COPPER ALLOY 172

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	2 UNTHREADED HOLE(S) ALL MOUNTING FACILITIES
OVERALL HEIGHT	0.180 INCHES NOMINAL IN
BODY STYLE	SINGLE FLAIR ENTRY
UNTHREADED MOUNTING HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM ALL MOUNTING FACILITIES IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH	1.080 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
OVERALL WIDTH	0.330 INCHES NOMINAL IN
MATERIAL	COPPER ALLOY 172

SUBSTITUTES & CROSS-REFERENCES 7

11909-300-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

35-1B2-4-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

R357078-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

579R647H10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

125C3857-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

11019100-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 35-18-2-4-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 35-18-2-4-3?

35-18-2-4-3 is a 35-18-2-4-3. It is classified as a MRO (MRO_GENERAL).

What parts can replace 35-18-2-4-3?

There are 7 known substitutes for 35-18-2-4-3: 11909-300-1, 35-1B2-4-3, R357078-2 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 35-18-2-4-3?

35-18-2-4-3 is cataloged in the U.S. Government catalog under NSN 5998-01-070-6626. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

35-18-2-4-3 — 35-18-2-4-3

Request a Quote — 35-18-2-4-3