PartsTable
Technical Data Sheet
PartsTable / MRO / 35-1696
35-1696 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: PLASTIC ENCLOSURE, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT, shaft_length: 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-232-3390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 35-1696
NSN: 5961-00-232-3390
FSC: 5961
CAGE: 01643 — LEVITON MANUFACTURING CO., INC. DBA LEVITON LIGHTING CONTROLS DIVISION (USA)
SPECIFICATIONS
materialPLASTIC ENCLOSURE
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeSLEEVE SHAFT
shaft_length0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
cubic_measure0.476 CUBIC INCHES
overall_width0.165 INCHES MAXIMUM IN
overall_height0.210 INCHES MAXIMUM IN
overall_length0.205 INCHES MAXIMUM IN
NSN5961-00-232-3390
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 35-1696 MFR OEM RESISTOR,VARIABLE,WIRE WOUND,NON
KEY FEATURES
•
INTERNAL CONFIGURATION: JUNCTION CONTACT
•
SEMICONDUCTOR MATERIAL: SILICON
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 25.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-BASE, EMITTER OPEN AND 25.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-EMITTER, BASE OPEN
•
CURRENT RATING PER CHARACTERISTIC: 500.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC AND 50.00 MILLIAMPERES MAXIMUM EMITTER CURRENT, DC
•
POWER RATING PER CHARACTERISTIC: 350.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION
•
MATERIAL: PLASTIC ENCLOSURE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.210 INCHES MAXIMUM IN
INTERNAL CONFIGURATIONJUNCTION CONTACT
SEMICONDUCTOR MATERIALSILICON
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC25.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-BASE, EMITTER OPEN AND 25.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-EMITTER, BASE OPEN
OVERALL WIDTH0.165 INCHES MAXIMUM IN
CURRENT RATING PER CHARACTERISTIC500.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC AND 50.00 MILLIAMPERES MAXIMUM EMITTER CURRENT, DC
POWER RATING PER CHARACTERISTIC350.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION
MATERIALPLASTIC ENCLOSURE
SPECIAL FEATURESJUNCTION PATTERN ARRANGEMENT: NPN
TERMINAL TYPE AND QUANTITY3 UNINSULATED WIRE LEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
2N5226AInterchangeable
interchangeable cross-reference
interchangeable
35-1695Interchangeable
interchangeable cross-reference
interchangeable
RELEASE5745Interchangeable
interchangeable cross-reference
interchangeable
2N5222Interchangeable
interchangeable cross-reference
interchangeable
2N5224Interchangeable
interchangeable cross-reference
interchangeable
2N5227Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 35-1696?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35-1696?
35-1696 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 35-1696?
There are 10 known substitutes for 35-1696: 2N5226A, 35-1695, RELEASE5745 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35-1696?
35-1696 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-232-3390. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35-1696

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026