PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35-15856Z
35-15856Z ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, center_hole_diameter: 0.926 INCHES NOMINAL IN, fsc_application_data: PUMP,HYDRAULIC,ACFT, cross-sectional_height: 0.070 INCHES NOMINAL IN, cross-sectional_shape_style: O-RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-527-7796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35-15856Z
NSN: 5330-00-527-7796
FSC: 5330
CAGE: 9F512 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC PUMP DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
center_hole_diameter0.926 INCHES NOMINAL IN
fsc_application_dataPUMP,HYDRAULIC,ACFT
cross-sectional_height0.070 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING
NSN5330-00-527-7796
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35-15856Z MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.926 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
FSC APPLICATION DATA: PUMP,HYDRAULIC,ACFT
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.926 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEO-RING
FSC APPLICATION DATAPUMP,HYDRAULIC,ACFT
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
0616C1032-6Interchangeable
interchangeable cross-reference
interchangeable
57460-709Interchangeable
interchangeable cross-reference
interchangeable
50168Interchangeable
interchangeable cross-reference
interchangeable
250-1-1-4Interchangeable
interchangeable cross-reference
interchangeable
250-1 1/4Interchangeable
interchangeable cross-reference
interchangeable
66A73F13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35-15856Z?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35-15856Z?
35-15856Z is a PACKING,PREFORMED.
What parts can replace 35-15856Z?
There are 7 known substitutes for 35-15856Z: 0616C1032-6, 57460-709, 50168 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35-15856Z?
35-15856Z is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-527-7796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35-15856Z

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026