PartsTable
Technical Data Sheet
Download PDF

35-118692 — THUMBSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

35-118692: THUMBSCREW.

The THUMBSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, head_style: KNURLED NO. 2, head_height: 0.438 INCHES NOMINAL IN, point_style: FLAT, thread_class: 2A A, head_diameter: 1.375 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-208-6242, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35-118692
NSN: 5305-00-208-6242
FSC: 5305 — Screws
CAGE: 9F512 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC PUMP DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
head_styleKNURLED NO. 2
head_height0.438 INCHES NOMINAL IN
point_styleFLAT
thread_class2A A
head_diameter1.375 INCHES NOMINAL IN
thread_length1.250 INCHES MAXIMUM IN
fastener_length1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM HEAD
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch18
NSN5305-00-208-6242
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 35-118692 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.438 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 1.250 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: KNURLED NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.438 INCHES NOMINAL IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH1.250 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEKNURLED NO. 2
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SURFACE TREATMENTCADMIUM HEAD
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
35-11869Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 35-118692?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35-118692?
35-118692 is a THUMBSCREW.
What parts can replace 35-118692?
There is 1 known substitute for 35-118692: 35-11869. Substitute compatibility should be verified for your specific system.
What is the NSN for 35-118692?
35-118692 is cataloged in the U.S. Government catalog under NSN 5305-00-208-6242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35-118692

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.