PartsTable
Technical Data Sheet
Download PDF

34N(0.187)-FL — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

34N(0.187)-FL: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: SLEEVE, nut_length: 0.149 INCHES NOMINAL IN, nut_diameter: 0.155 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-882-0615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34N(0.187)-FL
NSN: 5310-00-882-0615
FSC: 5310 — Nuts and Washers
CAGE: 86577 — PRECISION METAL PRODUCTS CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSLEEVE
nut_length0.149 INCHES NOMINAL IN
nut_diameter0.155 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_thickness0.031 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.112 INCHES IN
cross-sectional_shapeHEXAGONAL FLANGE
thread_quantity_per_inch40
flange_width_across_flats0.189 INCHES NOMINAL IN
NSN5310-00-882-0615
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 34N(0.187)-FL · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.189 INCHES NOMINAL IN
•
NUT LENGTH: 0.149 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.031 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.155 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: HEXAGONAL FLANGE
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.189 INCHES NOMINAL IN
NUT LENGTH0.149 INCHES NOMINAL IN
FLANGE THICKNESS0.031 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.155 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
CROSS-SECTIONAL SHAPEROUND NUT
NUT STYLESLEEVE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
NCN4S1-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FNS-440-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 34N(0.187)-FL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34N(0.187)-FL?
34N(0.187)-FL is a NUT,SLEEVE.
What parts can replace 34N(0.187)-FL?
There are 2 known substitutes for 34N(0.187)-FL: NCN4S1-6, FNS-440-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 34N(0.187)-FL?
34N(0.187)-FL is cataloged in the U.S. Government catalog under NSN 5310-00-882-0615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34N(0.187)-FL