PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34HADH002-A26
34HADH002-A26 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The COVER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A INNER RING A, bore_diameter: 0.5904 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN, overall_width: 1.0940 INCHES MINIMUM AND 1.1040 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-125-2031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34HADH002-A26
NSN: 3110-01-125-2031
FSC: 3110
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 440A INNER RING A
bore_diameter0.5904 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN
overall_width1.0940 INCHES MINIMUM AND 1.1040 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresONE END FLANGED,DIAM 1.3550 IN. MIN 1.3650 IN. MAX,WIDTH 0.0990 IN. MIN 0.1010 IN. MAX,CONVERSION OUTWARD,MUST BE PERPENDICULAR TO SHAFT TO 0.003 IN. IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedALIGNING RING
end_item_identificationACFT ENG F-107
overall_outside_diameter1.2197 INCHES MINIMUM AND 1.2200 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
NSN3110-01-125-2031
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 34HADH002-A26 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 440A INNER RING A
•
FEATURES PROVIDED: ALIGNING RING
•
OVERALL OUTSIDE DIAMETER: 1.2197 INCHES MINIMUM AND 1.2200 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: MACHINED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 440A INNER RING A
FEATURES PROVIDEDALIGNING RING
OVERALL OUTSIDE DIAMETER1.2197 INCHES MINIMUM AND 1.2200 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONACFT ENG F-107
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
RETAINER FABRICATION METHODMACHINED
MATERIALSTEEL COMP 4340 RETAINER
SPECIAL FEATURESONE END FLANGED,DIAM 1.3550 IN. MIN 1.3650 IN. MAX,WIDTH 0.0990 IN. MIN 0.1010 IN. MAX,CONVERSION OUTWARD,MUST BE PERPENDICULAR TO SHAFT TO 0.003 IN. IN
LOAD DIRECTIONANGULAR
BORE DIAMETER0.5904 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
39160Interchangeable
interchangeable cross-reference
interchangeable
1400105-17Interchangeable
interchangeable cross-reference
interchangeable
MFF30Interchangeable
interchangeable cross-reference
interchangeable
6900W13P009Interchangeable
interchangeable cross-reference
interchangeable
HL24549Interchangeable
interchangeable cross-reference
interchangeable
HL22030Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34HADH002-A26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34HADH002-A26?
34HADH002-A26 is a COVER,ELECTRICAL CONNECTOR.
What parts can replace 34HADH002-A26?
There are 17 known substitutes for 34HADH002-A26: 39160, 1400105-17, MFF30 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34HADH002-A26?
34HADH002-A26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-125-2031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34HADH002-A26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026