PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34D46
34D46 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, hole_diameter: 0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN, overall_diameter: 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN, special_features: 0.031 IN BY 45 DEG CHAMFER ONE EDGE OF OD IN, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-517-1103, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34D46
NSN: 5310-00-517-1103
FSC: 5310
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
hole_diameter0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN
overall_diameter0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
special_features0.031 IN BY 45 DEG CHAMFER ONE EDGE OF OD IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-517-1103
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 34D46 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
SPECIAL FEATURES0.031 IN BY 45 DEG CHAMFER ONE EDGE OF OD IN
HOLE DIAMETER0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
150 75Interchangeable
interchangeable cross-reference
interchangeable
44145Interchangeable
interchangeable cross-reference
interchangeable
13375Interchangeable
interchangeable cross-reference
interchangeable
200175Interchangeable
interchangeable cross-reference
interchangeable
T73KWInterchangeable
interchangeable cross-reference
interchangeable
E13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34D46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34D46?
34D46 is a WASHER,FLAT.
What parts can replace 34D46?
There are 10 known substitutes for 34D46: 150 75, 44145, 13375 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34D46?
34D46 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-517-1103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34D46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026