PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34BD5171
34BD5171 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SHAFT,BALL BEARING is a the manufacturer industrial component. Key specifications include overall_width: 2.75 INCHES NOMINAL IN, inclosure_type: HERMETICALLY SEALED, overall_height: 1.25 INCHES NOMINAL IN, overall_length: 8.78 INCHES NOMINAL IN, end_item_identification: 5855-01-552-3289;VISIBLE LIGHT ILLUMINATOR, input_impedance_per_function_w/load: 100.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-564-8236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34BD5171
NSN: 3110-00-564-8236
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
overall_width2.75 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
overall_height1.25 INCHES NOMINAL IN
overall_length8.78 INCHES NOMINAL IN
special_featuresTORQUE MULTIPLICATION IS 3:1 TO 6:1,ACCURATE OPERATES USING LEVER,CAN USE RATCHET OR NON-RATCHET WHENCHES,INPUT FORCE IS SAME DIRECTION AS REACTION FORCE
end_item_identification5855-01-552-3289;VISIBLE LIGHT ILLUMINATOR
input_impedance_per_function_w/load100.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
part_name_assigned_by_controlling_agencyBEZEL ASSEMBLY
output_impedance_per_function_w/source_across_input180.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
NSN3110-00-564-8236
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 34BD5171 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
5310PL1389543Interchangeable
interchangeable cross-reference
interchangeable
W-2020Interchangeable
interchangeable cross-reference
interchangeable
5310005319514Interchangeable
interchangeable cross-reference
interchangeable
51NF2A5Interchangeable
interchangeable cross-reference
interchangeable
Z46Interchangeable
interchangeable cross-reference
interchangeable
10165Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34BD5171?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34BD5171?
34BD5171 is a SHAFT,BALL BEARING.
What parts can replace 34BD5171?
There are 6 known substitutes for 34BD5171: 5310PL1389543, W-2020, 5310005319514 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34BD5171?
34BD5171 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-564-8236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34BD5171

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026