PartsTable
Technical Data Sheet
Download PDF

3491AS0720-1 — RETAINER,ROD END LOCKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3491AS0720-1: RETAINER,ROD END LOCKING.

The RETAINER,ROD END LOCKING is a the manufacturer industrial component. Key specifications include material: STEEL, end_item_identification: CAP, ROD END SHEAVE DAMPER;DRIVE SYSTEM ARRANG, criticality_code_justification: AGAV, part_name_assigned_by_controlling_agency: INAVY-CAP, ROD END. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-504-2416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3491AS0720-1
NSN: 5340-01-504-2416
FSC: 5340 — Hardware, Commercial
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL
end_item_identificationCAP, ROD END SHEAVE DAMPER;DRIVE SYSTEM ARRANG
criticality_code_justificationAGAV
part_name_assigned_by_controlling_agencyINAVY-CAP, ROD END
NSN5340-01-504-2416
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3491AS0720-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONAGAV
SPECIAL FEATURES1 INCH THICH; OD=6.440 INCHES; 12 EQUIDISTANT THRU HOLES .660 INCH DIAMETER; 12 HOLES ARE COUNTERBORED 1 INCH DIAMETE X .280 INCH DEEP. 1 CENTER HOLE DRILLED AND TAPPED 5/8-18UNF-2B X .500 INCH DEEP IN
PART NAME ASSIGNED BY CONTROLLING AGENCYINAVY-CAP, ROD END
END ITEM IDENTIFICATIONCAP, ROD END SHEAVE DAMPER;DRIVE SYSTEM ARRANG
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3491AS0720Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — mutilation + specific procedure
Ready to buy 3491AS0720-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3491AS0720-1?
3491AS0720-1 is a RETAINER,ROD END LOCKING.
What parts can replace 3491AS0720-1?
There is 1 known substitute for 3491AS0720-1: 3491AS0720. Substitute compatibility should be verified for your specific system.
What is the NSN for 3491AS0720-1?
3491AS0720-1 is cataloged in the U.S. Government catalog under NSN 5340-01-504-2416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3491AS0720-1