PartsTable
Technical Data Sheet
348W212M2 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, housing_bore_diameter: 3.481 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-4841, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
348W212M2
NSN: 5330-00-285-4841
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
housing_bore_diameter3.481 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-285-4841
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 348W212M2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER: 3.481 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER3.481 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
B-34077Interchangeable
interchangeable cross-reference
interchangeable
29308Interchangeable
interchangeable cross-reference
interchangeable
A2466-7Interchangeable
interchangeable cross-reference
interchangeable
402294-150Interchangeable
interchangeable cross-reference
interchangeable
77504X1LTInterchangeable
interchangeable cross-reference
interchangeable
204PPTFANG25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 348W212M2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 348W212M2?
348W212M2 is a SEAL,PLAIN ENCASED.
What parts can replace 348W212M2?
There are 25 known substitutes for 348W212M2: B-34077, 29308, A2466-7 and 22 more. Substitute compatibility should be verified for your specific system.
Is 348W212M2 still available?
348W212M2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 348W212M2