The RESISTOR,FIXED,WIRE WOUND is a Trefl industrial component. Key specifications include material: COPPER OVERALL, body_style: BUSHING MOUNTED, case_style: RECESSED, seal_width: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, body_length: 2.125 INCHES NOMINAL IN, temp_rating: 250.0 FAHRENHEIT DEGF. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-438-9022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→34891
NSN:5330-00-438-9022 NIINs:004389022, 004525811, 007223229, 008528490, 013875256 FSC:5330 — Packing and Gasket Materials CAGE:80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
material
COPPER OVERALL
body_style
BUSHING MOUNTED
case_style
RECESSED
seal_width
0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
body_length
2.125 INCHES NOMINAL IN
temp_rating
250.0 FAHRENHEIT DEGF
body_diameter
1.000 INCHES NOMINAL IN
overall_width
7.140 INCHES IN
bushing_length
0.690 INCHES NOMINAL IN
inclosure_type
FULLY INCLOSED
overall_length
16.000 INCHES IN
actuator_height
0.500 INCHES NOMINAL IN
NSN
5330-00-438-9022
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 4.506 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.503 INCHES MINIMUM AND 4.508 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1975 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
TECHNICAL CHARACTERISTICS
TEMP RATING
250.0 FAHRENHEIT DEGF
SEAL WIDTH
0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
SEALING ELEMENT STYLE
ANGULAR
OUTSIDE DIAMETER
4.506 INCHES NOMINAL IN
HOUSING BORE DIAMETER
4.503 INCHES MINIMUM AND 4.508 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED
1975 FEET PER MINUTE FT
CASE STYLE
RECESSED
SPECIAL FEATURES
SURFACE TREATMENT IS CARCINOGEN
ACCOMMODATED SHAFT DIAMETER
3.497 INCHES MINIMUM AND 3.503 INCHES MAXIMUM IN
TEST DATA DOCUMENT
81349-45005 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34891?
34891 is a RESISTOR,FIXED,WIRE WOUND manufactured by Trefl. It is classified as a MRO (MRO_GENERAL).
What parts can replace 34891?
There are 6 known substitutes for 34891: 2587118, 350-450-14-03EH51, 350-450-14-038851 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34891?
34891 is cataloged in the U.S. Government catalog under NSN 5330-00-438-9022. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.