PartsTable
Technical Data Sheet
PartsTable / MRO / 348854
348854 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.90 INCHES NOMINAL IN, cubic_measure: 0.002 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_width: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-307-2081, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 348854
NSN: 5340-00-307-2081
FSC: 5340
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
body_length0.250 INCHES NOMINAL IN
body_diameter0.90 INCHES NOMINAL IN
cubic_measure0.002 CUBIC INCHES
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_width0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
terminal_length1.50 INCHES NOMINAL IN
special_featuresMAXIMUM VOLTAGE APPLIED SHALL NOTEXCEED 250 VOLTS AC OR DC
style_designatorAXIAL TERMINAL EACH END
electrical_resistance20.0 MEGOHMS
reliability_indicatorESTABLISHED
unpackaged_unit_weight0.5 GRAMS G
NSN5340-00-307-2081
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 348854 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
02-2151Interchangeable
interchangeable cross-reference
interchangeable
3773-1304-8Interchangeable
interchangeable cross-reference
interchangeable
PR1 15K 2% .25WInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 348854?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 348854?
348854 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 348854?
There are 3 known substitutes for 348854: 02-2151, 3773-1304-8, PR1 15K 2% .25W. Substitute compatibility should be verified for your specific system.
What is the NSN for 348854?
348854 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-307-2081. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 348854

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026