PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34845S7S8
34845S7S8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.495 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OR ZINC OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1098, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34845S7S8
NSN: 5310-00-013-1098
FSC: 5310
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.495 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.077 INCHES NOMINAL IN
nondefinitive_spec/std_data3 STYLE AND A CLASS
material_document_and_classificationFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,OR QQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-013-1098
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 34845S7S8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.077 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,OR QQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 3 STYLE AND A CLASS
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
HOLE DIAMETER: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.077 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,OR QQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA3 STYLE AND A CLASS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.495 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
30X562Interchangeable
interchangeable cross-reference
interchangeable
12X199Interchangeable
interchangeable cross-reference
interchangeable
3064686Interchangeable
interchangeable cross-reference
interchangeable
FFW84CLASSASTYLE3Interchangeable
interchangeable cross-reference
interchangeable
DX253Interchangeable
interchangeable cross-reference
interchangeable
34846S2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34845S7S8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34845S7S8?
34845S7S8 is a WASHER,LOCK.
What parts can replace 34845S7S8?
There are 26 known substitutes for 34845S7S8: 30X562, 12X199, 3064686 and 23 more. Substitute compatibility should be verified for your specific system.
Is 34845S7S8 still available?
34845S7S8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34845S7S8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026