PartsTable
Technical Data Sheet
Download PDF

348294-1 — 348294-1

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

348294-1: 348294-1.

The 348294-1 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, overall_width: 7.360 INCHES MINIMUM AND 7.380 INCHES MAXIMUM IN, overall_length: 7.570 INCHES MINIMUM AND 7.790 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, end_item_identification: AN/GRC-206(V), cross-sectional_shape_style: EMI. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-650-9959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 348294-1
NSN: 5315-00-650-9959
NIINs: 006509959, 009930741, 014290149
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
overall_width7.360 INCHES MINIMUM AND 7.380 INCHES MAXIMUM IN
overall_length7.570 INCHES MINIMUM AND 7.790 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
end_item_identificationAN/GRC-206(V)
cross-sectional_shape_styleEMI
cross_section_outside_diameter0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
outside_corner_inverted_radius0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
material_document_and_classificationUNABLE TO DECODE
environmental_protection_material_locationTHROUGHOUT SEALING GASKET
NSN5315-00-650-9959
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 348294-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 250.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.670 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 2.720 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 1.500 INCHES NOMINAL IN
•
DIAMETER: 0.977 INCHES MINIMUM AND 0.983 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH250.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
UNDERCUT DIAMETER0.670 INCHES NOMINAL IN
UNDER HEAD LENGTH2.720 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER1.500 INCHES NOMINAL IN
DIAMETER0.977 INCHES MINIMUM AND 0.983 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
EFFECTIVE LENGTH0.150 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
348294Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 348294-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 348294-1?
348294-1 is a 348294-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace 348294-1?
There is 1 known substitute for 348294-1: 348294. Substitute compatibility should be verified for your specific system.
What is the NSN for 348294-1?
348294-1 is cataloged in the U.S. Government catalog under NSN 5315-00-650-9959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 348294-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.