PartsTable
Technical Data Sheet
Download PDF

34817 — CONNECTOR BODY,PLUG,ELECTRICAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

34817: CONNECTOR BODY,PLUG,ELECTRICAL.

The CONNECTOR BODY,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include end_item_identification: BOAT, RIGID INFLATABLE, 7 METER 7MRB0802, part_name_assigned_by_controlling_agency: TAB WASHER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-2387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34817
NSN: 5310-00-209-2387
NIINs: 002092387, 006924321, 012746822, 014219514, 014971002, 015405584, 015780229
FSC: 5310 — Nuts and Washers
CAGE: 6Z800 — A AND M AEROSPACE, INC. (USA)
SPECIFICATIONS
end_item_identificationBOAT, RIGID INFLATABLE, 7 METER 7MRB0802
part_name_assigned_by_controlling_agencyTAB WASHER
NSN5310-00-209-2387
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 34817 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
OUTSIDE DIAMETER: 1.875 INCHES NOMINAL IN
•
RECESS DEPTH: 0.0625 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.124 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
RECESS DIAMETER: 1.344 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL COMP C1 OVERALL
•
HOLE DIAMETER: 1.134 INCHES MINIMUM AND 1.144 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECESSED
OUTSIDE DIAMETER1.875 INCHES NOMINAL IN
RECESS DEPTH0.0625 INCHES NOMINAL IN
MATERIAL THICKNESS0.124 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
RECESS DIAMETER1.344 INCHES MINIMUM AND 1.354 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL COMP C1 OVERALL
HOLE DIAMETER1.134 INCHES MINIMUM AND 1.144 INCHES MAXIMUM IN
RECESS ANGLE45.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 2
348174Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
5310PL2025838Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 34817?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34817?
34817 is a CONNECTOR BODY,PLUG,ELECTRICAL.
What parts can replace 34817?
There are 2 known substitutes for 34817: 348174, 5310PL2025838. Substitute compatibility should be verified for your specific system.
What is the NSN for 34817?
34817 is cataloged in the U.S. Government catalog under NSN 5310-00-209-2387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34817

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.