PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 347C510H01
347C510H01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.120 INCHES NOMINAL IN, height: 0.313 INCHES NOMINAL IN, length: 0.281 INCHES NOMINAL IN, material: STEEL COMP 302, hole_diameter: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-994-6301, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
347C510H01
NSN: 5340-00-994-6301
FSC: 5340
CAGE: 97942 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
width0.120 INCHES NOMINAL IN
height0.313 INCHES NOMINAL IN
length0.281 INCHES NOMINAL IN
materialSTEEL COMP 302
hole_diameter0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
surface_treatmentPASSIVATE OR CADMIUM
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-994-6301
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 347C510H01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 0.313 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
FURNISHED ITEMS: LOCKNUT
•
MATERIAL: STEEL COMP 302
•
LENGTH: 0.281 INCHES NOMINAL IN
•
WIDTH: 0.120 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OR CADMIUM
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT0.313 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
FURNISHED ITEMSLOCKNUT
MATERIALSTEEL COMP 302
LENGTH0.281 INCHES NOMINAL IN
WIDTH0.120 INCHES NOMINAL IN
HOLE DIAMETER0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OR CADMIUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
R3459BInterchangeable
interchangeable cross-reference
interchangeable
92705Interchangeable
interchangeable cross-reference
interchangeable
2HE873Interchangeable
interchangeable cross-reference
interchangeable
PS1-30-5-B24Interchangeable
interchangeable cross-reference
interchangeable
501233Interchangeable
interchangeable cross-reference
interchangeable
AN6227-24ESInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 347C510H01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 347C510H01?
347C510H01 is a CLAMP,SYNCHRO.
What parts can replace 347C510H01?
There are 19 known substitutes for 347C510H01: R3459B, 92705, 2HE873 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 347C510H01?
347C510H01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-994-6301. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 347C510H01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026