PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34707S
34707S ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: IRON AND STEEL OVERALL, thickness: 0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN, hole_diameter: 0.375 INCHES NOMINAL IN, overall_diameter: 1.000 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0691, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34707S
NSN: 5310-00-209-0691
FSC: 5310
CAGE: 79410 — LIBERTY VENTURES INTI, LLC (USA)
SPECIFICATIONS
materialIRON AND STEEL OVERALL
thickness0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
hole_diameter0.375 INCHES NOMINAL IN
overall_diameter1.000 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-209-0691
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 34707S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
MATERIAL: IRON AND STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
MATERIALIRON AND STEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER1.000 INCHES NOMINAL IN
HOLE DIAMETER0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS27183-15Interchangeable
interchangeable cross-reference
interchangeable
AN945-6Interchangeable
interchangeable cross-reference
interchangeable
331967Interchangeable
interchangeable cross-reference
interchangeable
10626-3Interchangeable
interchangeable cross-reference
interchangeable
1086661G001Interchangeable
interchangeable cross-reference
interchangeable
SE26AMT1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34707S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34707S?
34707S is a WASHER,FLAT.
What parts can replace 34707S?
There are 18 known substitutes for 34707S: MS27183-15, AN945-6, 331967 and 15 more. Substitute compatibility should be verified for your specific system.
Is 34707S still available?
34707S is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34707S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026